Fast and effctive scale remover. It is a superior heavy duty POWDER containing accelerators, corrosion inhibitors & wetting agents with scale dissolver. Specifically formulated to remove rust and water scale build up from boiler evaporators, heat exchangers, cooling systems, pipeline collection system etc. Highly effective on heating. Safe and easy handling and storage.

–   Non-combustible solid
–   Also can be use for removal of loose corrosion products, Organic Foulant, And deposition of clay and SILT deposit.
–   Biodegradable chemical compound without FUMES increases its popularity and also makes it EASY to HANDLE.

Scale and Rust Remover (Powder)

RXSOL-54-1008-025 is a dry acid cleaner formulated to remove rust and scale deposits from  boilers, diesel engine cooling water systems, condensers, evaporators, calorifiers and heat exchangers.

This product is compatible and suitable with aluminum, copper, zinc, galvanized metals, steel boilers etc.

Powder Acid for Removal of Scale and Rust

Technical Bulletin

Rx–Safe acid (RXSOL-54-1008-025)
Scale and Rust Remover (Powder)
HS CODE of Safe Acid Descalex powder 34021300

Product Description: Economical , heavy duty  RXSOL-54-1008-025  is anadvanceddry  acid  cleaner  formulated with inorganic acid & corroision inhibitor, wetting agents, antifoam agentsindicator to remove rust and scale deposits from water boilers,diesel engine cooling systems, condensers, evaporators, heat exchangers, pipeline collection systems etc.

Procedure-of-use: The most effective descaling is accomplished by circulation.In the case of small components,the soak method in an immersion bath can be used. If the equipment to be cleaned is contaminated by oil, grease or sludge, then pre-cleaning with DEGREASER ( RXSOL OB 1005 ) is necessary. Depending on the extent of scaling, use a solution of 2.5-10% RXSOL-54-1008-025 . The solution will have a red colour which changes to orange when 85% of the acid has been neutralized , & to colourless  when the solution is totally neutralized. Whenever possible, the solution should be heated to 60°C.Neutralised  solutions can be re-activated by adding more RXSOL-54-1008-025  until the red colour reappears. This should not be done more than twice. RXSOL-54-1008-025  should not be used on Aluminium , Zinc, Tin or Galvanized surfaces.

Fields: Descaling of  Boilers, Descaling  of Diesel Engine Cooling Systems, Condenser, Pipeline collection system, Evaporators, Calorifiers, Heat Exchangers,The strength of the acid can be enhanced by adding 1part sodium chloride (common salt) to 20 parts of Descalex.If salt is not available, an acceptable alternative is to dissolve RXSOL-54-1008-025  in sea water. After use of RXSOL-54-1008-025  a  0.5% solution of Alkalinity Control in fresh  water should be used for neutralization.

PRODUCT PROPERTIES :

Characteristic:
–Powder product-safe and easy handling and storage.   
–Fast and effective scale remover,It is water-soluble,non-flammable, non-volatile and non-hydroscopic Inhibitors
–protect metals. Requires no heating unless its activity is required to increase fast.Contains anti-foam agent . 
–Colour indicator shows solution strength.
–Removes scale from boilers.                                                                                                 
–Removes scale from Diesel Engine cooling systems.                                                                                   
–Removes scale and rust from Condensers, Evaporators,Heat Exchangers etc

Product Label