Powerfull cleaner for stainless steel separator & purifier Discs . RXSOL-16-1007-530 is an extremely effective for removal of carbonaceous deposits and SALT DEPOSITION ( Salts of Calcium Carbonate etc. ) burnt grease , carbon deposit , oily residues and lacquers found in fuel oil and lube oil purifiers filters and fuel oil separators.

RXSOL-16-1007-530 is a liquid blend of organic acid with heavy duty & concentrated emulsifying agents.

NOTE:- Mechanical cleaning ( Scrubbing and Brushing ) damage to discs which results in poor performance. Characteristics:- Formulated to remove heavy tenacious deposits. Allows cleaning of discs without dismantling of disc stacks. Reduces downtime. Improves efficiency of centrifuge installation. Cleans down to metal surfaces. Cleans all types of separator discs

ORGANIC ACID CLEANING AGENT FOR CLEANING STAINLESS STEEL SEPARATOR DISCS AND SEPARATOR BOWL.

Contaminants found on separator discs mostly consist of hardness salts (calcium carbonate etc.) and partly carbonized oil. The combination of dissolving agents, acids and surface active agents makes it possible to clean the separator discs quickly without brushing.

PURIFIER DISC CLEANER is a concentrated liquid mixture especially designed to remove heavy tenacious deposits which collect in fuel and lube oil centrifugal separators

Technical Bulletin

Organic Acid Degreaser

RXSOL-16-1007-530

INTRODUCTION:-

RXSOL-16-1007-530  is a liquid blend of organic solvent with heavy duty & concentrated emulsifying agents . An extremely effective for removal of burnt grease , carbon deposit , oily residues and lacquers found in fuel oil and lube oil purifiers and filters 

FIELDS:-
 

A very fast  & effectively removes without the need of Scrubbing and Brushing of Centrifugal Separators, Disc & all types of heavy tenacious deposits  which collect  in fuel &  lube oils centrifugal separators disc stacks.

NOTE:- Mechanical cleaning ( Scrubbing and Brushing ) damage to discs which results in poor performance.
 

Procedure:-
 

Should be diluted ,at the rate of 1-parts RXSOL-16-1007-530 to 5-parts water,( Or 1:1 ratio of any solvent like diesel ) before use or depend  on nature of dirt / contamination  RXSOL-16-1007-530  may be used directly.
At 50 to 60°C for best result apply higher concentration for 15 min. to  3 hours.
After the unit or parts have been satisfactorily cleaned, they should be rinsed thoroughly with fresh water. It is recommended that this product is not used on soft metal, Zinc,Tin, Galvanized surfaces or Anodized Aluminium.
 

NOTE:- 
Recirculation  and  heating will improves the cleaning action.
 

Characteristics:-

• Formulated to remove heavy tenacious deposits.
• Allows cleaning of discs without dismantling of disc stacks.
• Reduces downtime.
• Improves efficiency of centrifuge installation.
• Cleans down to metal surfaces.
• Cleans all types of separator discs

                                      **Read the Material Safety Data Sheet before using this product**

Product Label

RXSOL-16-1007-530 is a liquid blend of organic solvent with heavy duty & concentrated emulsifying Acidic agents , which is developed for cleaning stainless steel separator discs . An extremely effective for removal of SALT DEPOSITION ( Salts of Calcium Carbonate etc. ) burnt grease , carbon deposit , oily residues and lacquers found in fuel oil and lube oil purifiers and filters. NOTE:- Mechanical cleaning ( Scrubbing and Brushing ) damage to discs which results in poor performance.