Fluorescein Liquid Dye Rx is a water-based fluorescent tracer dye that meets the minimum biodegradation requirements, removing the need for a substitution warning unlike the standard fluorescein leak tracing dyes. Fluorescein Liquid Dye Rx provides a fluorescent colour which is visible to the naked eye and can be detected subsea by cameras, fluorimeters calibrated to the appropriate excitation / detection wavelength
.
Fluorescein Liquid Dye Rx is lower in toxicity towards operatives and marine organisms than other leak testing dyes, such as Rhodamine and is non-hazardous for supply and transportation.It is compatible with Rxsol Hydrotech 367 Rx corrosion inhibitors and oxygen scavengers.
Technical Bulletin
Description :
Fluorescein Liquid Dye Rx is a water-based fluorescent tracer dye that meets the minimum biodegradation requirements, removing the need for a substitution warning unlike the standard fluorescein leak tracing dyes. Fluorescein Liquid Dye Rx provides a fluorescent colour which is visible to the naked eye and can be detected subsea by cameras, fluorimeters calibrated to the appropriate excitation / detection wavelength.
Fluorescein Liquid Dye Rx is lower in toxicity towards operatives and marine organisms than other leak testing dyes, such as Rhodamine and is non-hazardous for supply and transportation.It is compatible with Rxsol Hydrotech 367 Rx corrosion inhibitors and oxygen scavengers.
Application :
Fluorescein Liquid Dye Rx is a commonly used dye for hydro test operations .Fluorescein Liquid Dye Rx is a brown liquid which produces a red / pink solution once diluted in water. The solution then produces an orange fluorescence when excited with a blue or green light. For subsea detection of Fluorescein Liquid Dye Rx, an optimum excitation wavelength should be used.
Dose :
Normal dose for application is approximately 100 ppm. Rx Marine can not stipulate an exact dose for Fluorescein Liquid Dye Rx . This is due to the strength of colour required being determined by a number of scenarios e.g. style and sensitivity of detection apparatus, sea bed depth and tidal currents. Generally, as a rule of thumb, the dye must not be dosed at below 100ppm for visual detection.
Detection of Fluorescein Liquid Dye Rx has been proven using the Leak Detection Systems.
Physical Properties :
Appearance | Liquid |
Colour | Brown |
Solubility | Soluble In Water. |
Melting Point | 0 °C |
Relative Density | 1.0-1.07 @ 20c |
Ph-Value, Conc. | 9-10 |
Viscosity | <5 Cps @ 20degc |
Handling :
No special procedures need to be observed. Normal precautions should be taken and protective clothing,
goggles and PVC/rubber gloves should be worn.
Packing : Available in 25 Litre, Pail, 210 Ltrs drums, 1,000 litre IBC’s capacity.
Product Label