RXSOL-16-3006-025 is a superior & powerful alkaline cleaner containing corrosion inhibitors to prevents the corrosion of   metals . Concentrated, anionic detergent or manual and ultrasonic cleaning. Free rinsing to give you reliable results without interfering residues. Ideal for cleaning contaminants from glassware, metals, plastics, ceramic, porcelain, rubber and fiberglass. Excellent replacement for corrosive acids and hazardous solvents. It is low toxic product with an exceptional solvency power on soil & oily  matter & having good foaming qualities. It is free from Hydrocarbon solvents, Biodegradable and minimizes the extreme hazards to personnel in handling materials .It is specially formulated for ultrasonic cleaning applications.

Corrosion inhibited formulation recommended for glass, metal, stainless steel, porcelain, ceramic, plastic, rubber and fiberglass. Can be used on soft metals such as copper, aluminum, zinc and magnesium if rinsed promptly. Corrosion testing may be advisable.

Technical Bulletin

Ultrasonic Cleaner (RXSOL-16-3006-210)

Product Description:-RXSOL-16-3006-210 is a superior & powerful alkaline cleaner containing corrosion inhibitors to prevents the corrosion of   metals . Concentrated, anionic detergent or manual and ultrasonic cleaning. Free rinsing to give you reliable results without interfering residues. Ideal for cleaning contaminants from glassware, metals, plastics, ceramic, porcelain, rubber and fiberglass. Excellent replacement for corrosive acids and hazardous solvents. It is low toxic product with an exceptional solvency power on soil & oily  matter & having good foaming qualities. It is free from Hydrocarbon solvents, Biodegradable and minimizes the extreme hazards to personnel in handling materials .It is specially formulated for ultrasonic cleaning applications. Corrosion inhibited formulation recommended for glass, metal, stainless steel, porcelain, ceramic, plastic, rubber and fiberglass. Can be used on soft metals such as copper, aluminum, zinc and magnesium if rinsed promptly. Corrosion testing may be advisable.

Applications:- Healthcare instruments, laboratory ware, vacuum equipment, tissue culture ware, personal protective equipment, sampling apparatus, catheters, tubing, pipes, radioactive contaminated articles, optical parts, electronic components, pharmaceutical apparatus, cosmetics manufacturing equipment, metal castings, forgings and stampings, industrial parts, tanks and reactors. Also Suitable for cleaning engine components like fuel and  Lube oil filters, Injection nozzles, pump components, inlet  and  exhaust valves &  primarily refers to cleaning of  hard surfaces, such as Decks, Tanks, Engine-rooms,  etc. can be used for all  types of cleaning and degreasing and  may be applied by brush, handspray, high and low pressure washing machines etc.

Directions for Use and Dose Rates:- Soil, grit, grime, buffing compound, slime, grease, oils, blood, tissue, salts, deposits, particulates, solvents, chemicals, radioisotopes, radioactive contaminations, silicon oils, mold release agents.

Typical Cleaning : Make a fresh 1% solution (2 1/2 Tbsp. per gal., 1 1/4 oz. per gal. or 10 grams per liter) in cold, warm, or hot water. If available use warm water. Use cold water for blood stains. For difficult soils, raise water temperature and use more detergent. Clean by soak, circulate, wipe, or ultrasonic method. Not for spray machines, will foam. For nonabrasive scouring, make paste. Use 2% solution to soak frozen stopcocks. To remove silver tarnish, soak in 1% solution in aluminum container.
RINSE THOROUGHLY—preferably with running water. For critical cleaning, do final or all rinsing in distilled, deionized, or purified water. For food contact surfaces, rinse with potable water. Used on a wide range of glass, ceramic, plastic, and metal surfaces. Corrosion testing may be advisable.

General Cleaning:-RXSOL-16-3006-210 can be used for all types of cleaning &  degreasing & may  be applied by  Brush, Hand spray, high and low pressure washing machines etc. Time necessary for cleaning depends on the nature and  thickness of the deposits. 20-30 min. will suffice for   most applications. Hardened, carbonised or aged deposits may require up to 4 hours.If  the cleaning  solution is not heavily contaminated, it may be re-used at a later stage. If allowed to cool, the de-gassing procedure must be repeated.Depending on degree of contamination RXSOL-16-3006-210 should be mixed with warm water at a rate of 50-200 ml   per 10 litres. i.e. 1 cup of RXSOL-16-3006-210 to a bucket of water. RXSOL-16-3006-210  solution can  be applied  simply by mops, brushes or rags, or by dipping the soiled articles into  the RXSOL-16-3006-210 solution. After cleaning, rinse off with cold or warm water.

Procedure for Use With Ultersonic Equip:-Fill the ultrasonic unit chamber  with approx. 30-35  litres of clean fresh water. During cleaning process , the ultrasonic bath must be de-gassed. Allow the bath to run for 1-2 minutes without any objects or cleaning agent until the evolution of gas bubbles ceases. This is to enhance the cleaning effect. Add 1 litre RXSOL-16-3006-210 For heavy stubborn deposits, a second litre may be added for rapid action.

Precaution:-To avoid foaming, make sure that the water is filled prior to adding RXSOL-16-3006-210 Best results are obtained at temperatures of 60-80°C. For general cleaning it may takes 15 –30 minutes while for Hardened, carbonised or aged deposits may require up to 4-6 hours.

Tank Cleaning:-Cargo tank cleaning to remove residues of Mineral, Animal, Vegetable or Fish oil, Waxes  &  Soot from inert gas systems.

Method of Application and Dose Rates:-Direct injection method for tank washing machines. Dose rate 1-5 litres per ton wash water (0.1-0.5%). Recirculation method. Dose rate 1-7 litres per ton wash water (0.1-0.7%).Spot cleaning. Hand spray neat or diluted with up to 5 parts water and leave for several minutes before rinsing off with clean water.

Cleaning of Cargo Tanks to Remove Soot from Inert Gas Systems:-Spray RXSOL-16-3006-210 on with a high pressure cleaning machine and  use 1:6 with water. If used with hand sprayer, spray  the product  neat onto the surface, allowing 1 lit. for every 12 m2. Use a 5-8% solution in a tank washing machine. Leave for about 30-45 minutes. The surface should be kept wet. Wash down with hot water (80°C) and check the cargo tank.Repeat the procedure if necessary.

Note:-Whenever possible, the cleaning solution should be heated to 60-80°C. If this method is not possible, other conventional methods such as separate rate direct injection, recirulation   or hand spraying provide acceptable options. For boiler  fire  side  cleaning, a 10-20 % hot  solution, (temp. above 40°C),  should   be  sprayed on  to  the surfaces to be cleaned. Allow to  penetrate for 20 minutes and flush off. For deposits  which are very hard to remove, increase the concentration to 50% and repeat if necessary 

Product Properties:-

Characteristics:-

• Specially developed for use with ultrasonic cleaning baths.
• Removes grease, oil, carbon deposits, soil and grime.
• Water-based.
• Low-toxic.
• Biodegradable.
• Non-flammable.
• Compatible with oily-water separators.
• Very effective and economical in use .                                       

                                                **Read the Material Safety Data Sheet before using this product** 

Product Label

RXSOL-16-3006-210 is a superior & powerful alkaline cleaner containing corrosion inhibitors to prevents the corrosion of metals . Concentrated, anionic detergent or manual and ultrasonic cleaning. Free rinsing to give you reliable results without interfering residues. Ideal for cleaning contaminants from glassware, metals, plastics, ceramic, porcelain, rubber and fiberglass. Excellent replacement for corrosive acids and hazardous solvents. It is low toxic product with an exceptional solvency power on soil & oily matter & having good foaming qualities. It is free from Hydrocarbon solvents, Biodegradable and minimizes the extreme hazards to personnel in handling materials .It is specially formulated for ultrasonic cleaning applications.

Corrosion inhibited formulation recommended for glass, metal, stainless steel, porcelain, ceramic, plastic, rubber and fiberglass. Can be used on soft metals such as copper, aluminum, zinc and magnesium if rinsed promptly. Corrosion testing may be advisable.