RXSOL HOLDWASH is a versatile all-purpose QUALITY marine cleaning solution. It can be used as a powerful stand-alone cleaner for oily stains and residues, or in combination with RXSOL HOLDWASH as a barrier remover.RXSOL hold wash  is a versatile all purpose marine cleaning solution it can be used as a powerful stand alone cleaner  for Petroleum oily stains  and  residues, vegetable and animal fats, as well as dirt, proteins, soils, coal, ore, coke or in combination with RXSOL hold wash as a barrier remover.

Technical Bulletin

DISCRIPTION:

RXSOL HOLD WASH CONCENTRATED  is a versatile all-purpose marine cleaning solution. It can be used as a powerful stand alone cleaner for oily stains and residues, or in combination with RXSOL HOLD WASH CONC. as a barrier remover.RXSOL Hold Wash Conc is a versatile all purpose marine cleaning solution it can be used as a powerful stand alone cleaner  for oily stains  and reduces or in combination with Rxsol hold wash as a barrier remover.

MIXING INSTRUCTIONS

Fill a clean empty drum half way with FRESH water. Add required pails of Rxsol Hold Wash Concentrate (see dilution rates). Mix Well. Top up with water, stirring occasionally.

DILUTION RATES

Heavy-Duty Cleaner 1:1.5

3 Pails / Drum (75 ltrs:125 ltrs water) Coal, Petcoke, Concentrates, etc

General Cleaning 1:4

 (50 ltrs:170 ltrs water) Hold Maintenance, Engine Room, etc

APPLICATION INSTRUCTIONS:::HEAVY-DUTY CLEANER

Instructions for cleaning oily residues (Coal, Petcoke, Concentrates, etc), whether or not Rxsol Hold Block was used as a barrier before loading.

1. After discharge, remove as much remaining cargo as possible, as per normal procedures.

2. Do NOT wet surface before applying Hold Wash.

3. Mix 75 Ltrs of  Rxsol Hold Wash Concentrate with approx 125 Ltrs of  fresh water, as per Mixing Instructions.

4. Apply Rxsol  Hold Wash liberally to affected areas with a low-pressure application system.

5. Allow to soak for about 5 minutes. DO NOT ALLOW TO DRY.

6. Use a fire hose or high-pressure Machine to clean the area. Use the highest pressure possible Water.

7. Some brushing and/or scrubbing may be required for stains.

BARRIER REMOVAL

Instructions for removing  Hold Block Slip Coat after discharging non-oily cargos (Sulphur, Salt, etc)

1. After discharge, remove as much remaining cargo as possible, as per normal procedures.

2. Rinse down bulkheads with high-pressure water and  Let dry.

3. Mix 3 pails of Rxsol Hold Wash Concentrate with approx. 170 Ltrs of fresh water, as per Mixing Instructions.

4. Apply Rxsol Hold Wash liberally to affected areas with a low-pressure application system.

5. Allow to soak for about 5 minutes. DO NOT ALLOW TO DRY.

6. Use a firehose or high-pressure Machine to clean the area. Use the highest pressure possible water.

GENERAL CLEANING

Instructions for general hold maintenance and light-duty cleaning (engine room, crew’s locker, kitchen, crane pedestals, etc.)

1. Mix 2 pails of Rxsol  Hold Wash Concentrate with approx. 170 Ltrs of fresh water, as per Mixing  Instructions. For small areas, simply dilute 1:4 in any type of container.

2. Apply Rxsol Hold Wash liberally to affected areas.

3. Allow to soak for about 5 minutes. DO NOT ALLOW TO DRY.

4. Rinse clean with water.

HOW LONG TO SOAK?

5 minutes is only the suggested time. More time may be required for heavier residues. Determine the size of sections to clean and the soaking time by the current weather conditions. Clean small section in warm climates. In cooler temperatures, when drying time can be longer, clean larger sections. Do NOT allow Rxsol  Hold Wash to dry. If it does, then simply reapply.

PRECAUTIONS

Although Rxsol Hold Wash is safe to use, it may cause skin or eye irritation with prolonged contact. As a precaution, wear protective gloves, goggles and a mask. Do not spray directly onto skin or eyes. Avoid prolonged breathing of mist.

Rxsol has the wide range of chemicals for cleaning chemicals for any type of vessel Including those carrying coal petcock & related to get the cargo hold clean for the next cargo choice of  suitable cleaning chemical is essential & very important when applied the chemical resident type apply as important role as a surface active agent need time to penetrate & to take outside particular from the hold surface

Product Label

RXSOL HOLDWASH is a versatile all-purpose QUALITY marine cleaning solution. It can be used as a powerful stand-alone cleaner for oily stains and residues, or in combination with RXSOL HOLDWASH as a barrier remover.RXSOL hold wash is a versatile all purpose marine cleaning solution it can be used as a powerful stand alone cleaner for Petroleum oily stains and residues, vegetable and animal fats, as well as dirt, proteins, soils, coal, ore, coke or in combination with RXSOL hold wash as a barrier remover.
Non toxic , 100% biodegradable, Environmentally friendly, Non caustic Safe to use in occupied / covered areas , Can be diluted to suit cleaning needs